Aluminum Grating Panels

aluminum grating panels

Aluminum Grating Panels make rigid, virtually maintenance-free metal flooring products. Surface types can be flat bar grates or serrated type. Press-locked steel or aluminum bar grating is mostly used. Aluminum bar grating is designed to be a high-strength, low-weight strutural product. Available in a serrated surface for extra safety decking uses.

PROCESSING STYLES
Swaged Rectangular Aluminum Grating
Swage rectangular bar grate provides clean, crisp lines and the cross bar is fully locked within the bearing bar, slightly below the top surface.

Swage Locked "I-Bar" Aluminum Grating

One bar aluminum grating carries the same load as 3/16" thick rectangular bar type aluminum grating, but weighs slightly less per square foot. Additionally, the striated top and bottom flanges of the "I" bar provide enhanced skid resistance without the cost of serration.

Flush-Top Aluminum Grating

Manufactured with a unique, extruded cross bar that is flush with the top surface of the bearing bars after swaging, Flush-top aluminum grating provides an enhanced walking surface for areas subject to continuous pedestrian traffic.

Press Lock Aluminum Grates:

Press-Locked Bar Grating is constructed with the two close-tolerance slotted bars bonded together (positioned every 2" or 4") using tremendous hydraulic pressure. Permanent locking is achieved by forcing the deep cross bar into the bearing bar. Both the cross bars and the bearing bars provide walking surfaces in the press-locked design.